Konica Minolta DiMAGE_A2 instruction manual Focus-mode Switch

Models: DiMAGE_A2

1 180
Download 180 pages 10.32 Kb
Page 46
Image 46

Focus-mode Switch

Single-shot AF (Autofocus), continuous AF, and manual focus is set with the focus-mode switch. Slide the switch to select the appropriate focus mode.

Single-shot AF - a general purpose autofocusing mode. Its operation is described in the basic recording section.

Continuous AF - used for photographing moving subjects. The camera continu- ously tracks and focuses on the subject.

Place the focus area on the subject. The four-way key of the controller can be used to move the area anywhere in the live image for off center subjects.

Press the shutter-release button partway down to engage the subject lock; the focus signal will confirm focus. If the subject moves or the camera is panned, the focus area will follow the subject. Focus and exposure will change as the subject moves and lighting conditions change.

Press the shutter-release button all the way down to take the

 

picture. When the shutter button is released the focus area

 

returns to the center of the live image. Subject tracking can be

 

disabled and AE lock can be activated in section 4 of the

 

recording menu (p. 80). Subject Tracking AF may not be effec-

 

tive under low light.

Continuous AF focus signal

 

46 Advanced recording

Page 46
Image 46
Konica Minolta DiMAGE_A2 instruction manual Focus-mode Switch