Anti-shake System
The Anti-shake system minimizes the effect of camera shake, a slight blurring caused by subtle hand motion. Camera shake is more pro- nounced at the telephoto setting than at the wide-angle. Anti-shake is employed when the shutter speed falls below a certain limit depending on the focal length in use. The effectiveness of Anti-shake depends on the shutter speed in use and the degree of shaking. The system may not work with moving subjects or when the camera is panned.
When the system is active, the Anti-shake button glows (1). Anti-shake can be turned off and on by pressing the button.
Frame the subject as described in the basic operation section. Press the shutter-release button partway down to focus and set the exposure; an Anti-shake indicator is displayed when active. Confirm the image has stabilized on the monitor and press the shutter-release button all the way down to take the picture.
The blue indicator appears when the Anti-shake system is activated.
The yellow indicator appears when the Anti-shake system is activated, but the shutter speed is too slow for it to be effective.
When Anti-shake is off, the white indicator appears to warn the shutter speed is too long for the camera to be safely handheld.
If the yellow or white warnings appears, place the camera on a tripod, use the built-in flash, increase the camera sensitivity (ISO) (p. 74), or use a wide-angle zoom position. If the Anti-shake indicator turns red, the camera is overheating because of operating and ambient temperatures. The Anti-shake system will turn off automatically. Allow the camera to cool before using Anti- shake.
The Anti-shake system is less effective at short subject distances or when using the macro func- tion (p. 49). The use of a tripod is recommended. Anti-shake is not effective with a tripod mounted camera; turn off the Anti-shake function to conserve power.
37
1
/
