Konica Minolta DiMAGE_A2 instruction manual Exposure and Flash Compensation

Exposure and Flash Compensation

The ambient light and flash exposure can be adjusted before the image is captured to make the final picture lighter or darker. Exposure can be adjusted by as much as ±2Ev in 1/3 increments (p. 111). The exposure and flash compensation will remain in effect until it has been reset. For more on exposure and flash compensation, see page 110.

Adjustments to exposure must be set before the image is captured. When setting exposure or flash compensation, the change in Ev is shown on the data-panel aperture display and on the monitors. After the setting is made, the shutter-speed and aperture displays will indicate the actual exposure.

1

2

3

Press the exposure-compensation button (1).

Use the front control dial (2) to set exposure compensa- tion. The indicators are enlarged when being adjusted.

Use the rear control dial (3) to set flash compensation.

Press the shutter-release button partway down or press the exposure-compensation button to complete the operation. The values will automatically be set if a change is not made for a few seconds. If any other value except 0.0 was set, an indicator will be displayed on the monitor as a warning. Also see camera notes on page 65.

Flash compensation

Exposure compensation

59