Konica Minolta DiMAGE_A2 instruction manual Instant Playback

Instant Playback

After an image is captured, it can be displayed on the monitors for two or ten seconds before being saved. When using the continu- ous-advance or continuous-advance bracketing drive mode, an index display is used. Instant-playback is activated and the length of the playback period is set in section 2 of the recording menu (P. 80).

	Int. set	–
	Bracket set	Off
Data imprint		Off
	Imprint to	Image + Exif
Inst.playback		10 sec.
	Voice memo	Off

If the central button of the controller is pressed during the instant playback period, the displayed image(s) are saved immediately and the playback canceled.

Pressing the display-information button switches between displaying the image with and without the guidance bar.

:delete :store

Delete this frame?

YesNo

:delete :store

/ To delete an image during the instant playback, press the QV/delete button. A confirmation screen will appear.

Use the left/right keys of the controller to highlight “YES.” “NO” will cancel the operation.

Press the central button of the controller to delete the image. When a continuous or bracketed series of images is captured, the entire series will be erased.

/

100 Recording menu