2
Installing the Printer Driver
–Installation method by specifying manually
To specify a unit manually, select
[Specify the Printer/MFP Except for the Above] and click the [Re- fer to]. [Manual Selection] win- dow appears.
–Select either [Printer Path], [IP Address], [IP Host Name] or [Lo- cal Port] and enter information as required. Then click the [OK].
–Usually select [Local Port] - [LPT1] when using a parallel ca- ble.
–[Select Printers/MFPs to install] window appears again. Click the [Next]. [Confirm Installation Set- tings] window is appears.
8 Installation setting condition is dis- played. Check the setting and click [Install].
The printer driver is installed and the “Finish Installation Drivers” window appears.
9 Click [Finish].
Installation is completed.
|
