Setting Up Network Printing
3
3.2Setting the IP Address for This Machine
Use this machine’s control panel to assign an IP address to this machine.
Reminder
When specifying network settings, follow the instructions of the network administrator.
Setting the IP Address
1 Press the [Utility/Counter] key on this machine’s control panel, touch [Administrator Setting], and then enter the administrator password.
–The administrator password is required in order to enter Adminis- trator mode. Ask the administrator of this machine for the adminis- trator password.
2 Touch [Network Setting], then [TCP/IP Setting].
3
4
Specify settings for the following:
IP Address: Set the IP address of this machine.
Subnet Mask: Set the subnet mask for the network to which you are connecting.
Default Gateway: Set the default gateway address for the network to which you are connecting.
To apply the settings, restart this machine (turn it off, then on again).
After turning OFF, wait for more than 10 seconds and turn ON the pow- er. Then the IP address setting becomes effective.
