Kyocera E1100 manual Take a Picture, Change Camera Options, Select Menu Camera

6 Camera

Your phone comes with a camera. Before using your phone’s camera, here are some tips:

•You cannot activate the camera while on an active call or while browsing files in the media gallery.

•Once the camera is active, the home screen acts as the viewfinder.

•If you get a “Low memory” error, check your resolution and quality compression settings.

•If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous launch point.

•Menu settings and options can only be accessed when the camera is active.

Take a Picture

To take a picture:

1.Activate the camera one of the following ways:

–Press and hold the Camera key.

–Select Menu > Camera.

2.Focus on the image using the phone’s display as a viewfinder. Scroll up or down to zoom in and out.

3.Take a picture one of the following ways:

–Press the OK key.

–Press the Camera key.

–Select Capture.

The picture is saved to your camera pictures folder.

4.Select Send to create a multimedia message or Erase to delete the picture from your phone.

You can also send the picture to a Bluetooth device or a printer.

5.Press the End key to exit camera mode.

Change Camera Options

While in camera mode you can select one of the following:

•Options > Settings displays the following settings you may set up prior to taking a picture:

–Resolution adjusts the resolution.

–Self Timer sets a self timer. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated.

–Date/Time places a time stamp on the picture.

–Multishot allows you to take up to six multiple pictures while the camera key is pressed and held. A tone will play each time a picture is taken.

–Shutter Sound sets the sound used when the camera takes a picture.

32 Take a Picture