Kyocera E1100 manual Network, Set Com Port Speed, Enable Hearing Aid, Enable Date Mode

2.Select Menu > Settings > Accessories > TTY Device.

3.At the notification, select OK.

4.Select one of the following options:

–TTY Off to disable TTY.

–TTY On to enable for TTY devices.

–TTY On + Talk to enable for TTY devices and voice carry over.

–TTY On + Hear to enable for TTY devices and hearing carry over.

Note: You can also enable TTY when you enter ##889 with your keypad and select TTY.

Set Com Port Speed

The Com Speed sets the data rate at which your phone connects to a laptop or PC.

Select Menu > Settings > Accessories > Com Port Speed and a speed.

Check with your service provider for details.

Enable Hearing Aid

You can use your phone with a T-coil hearing aid device.

Note: Enable hearing aid feature only when using the phone with a T-coil hearing aid device.

1.Connect the T-coil hearing aid device to your phone.

2.Select Menu > Settings > Accessories > T-coil Hearing Aid.

3.At the notification, select OK.

4.Select Enabled.

Network

Your phone has several settings for how your phone connects to a network.

Enable Date Mode

Your phone may be able to receive certain data, depending on the system sending the information. You cannot receive voice calls while the phone is in data mode. To receive data, you must connect the phone to a laptop or PC and switch the phone from voice mode to data mode.

Note: To purchase a cable, visit

www.kyocera-wireless.com/store.

To enable data mode:

Select Menu > Settings > Network > Data Calls and one of the following:

•Voice Only turns data mode off.

•Data, next call sets the phone to data mode for the next incoming call or the next ten minutes.

•Data, until off sets the phone to data mode until the phone is turned off.

Enable Privacy Alert

Set your phone to alert you when enhanced digital CDMA privacy is lost or regained.

Select Menu > Settings > Network > Privacy Alert > Enabled.

60 Network