Kyocera FS-9130DN Troubleshooting, Message, Corrective Action, replaced, unit and so on, type

	Troubleshooting
Message	Corrective Action
Finisher	The option document finisher is not installed correctly. Install it correctly.
path error
;
Incorrect slot	The hard disk or the network interface card has been installed in the wrong slot.
Please reinstall	Turn off the printer and reinstalled in the correct slot.
Install MK	The maintenance kit (MK-710 for FS-9130DN and FS-9530DN) needs to be
	replaced.
	Replace the maintenance kit since the total number of printed pages has reached
	500,000. Call for service. The maintenance kit includes a drum unit, developer
	unit and so on.
Folding tray	The folding tray has become full. You must remove all printed pages from the
paper full	folding tray. When the printer senses that the folding tray is empty again, it will
	continue printing into the folding tray.
Load cassette #	There is data for printing that matches with a paper cassette setting (paper size,
(paper size)/(paper	paper type), but there is no paper in the paper cassette.
type)*	Set paper into the paper source as indicated by # in the operation panel, and
	press [GO] to restart printing. However, the paper source numbers (3 to 4) are
	only displayed when there is an option paper feeder installed.
*(paper size) and	Or, if you want to print from a different paper source press U or V to display Use
(paper type) are	alternative? (paper size)/(paper type) * and you can change the source for
displayed flashing	paper feeding.
alternately.	After selecting a paper source and pressing [MENU], Paper Handling >
	appears. By pressing Z, the paper size and type settings menu appears. After
	setting the correct paper size and type, press [OK] to check the paper source,
;	and press [GO] to start printing.
Load MP tray	There is no paper cassette set (paper size, paper type) that matches with the data
(paper size)/(paper	for printing, so printing is done from the MP tray. Set paper into the MP tray that
type)	matches the paper size and type shown on the display and press [GO] to restart
	printing.
*(paper size) and	Or, if you want to print from a different paper source press U or V to display Use
(paper type) are	alternative? (paper size)/(paper type) * and you can change the source for
displayed flashing	paper feeding.
alternately.	After selecting a paper source and pressing [MENU], Paper Handling >
	appears. By pressing U, the paper size and type settings menu appears. After
	setting the correct paper size and type, press [OK] to check the paper source,
;	and press [GO] to start printing.
Mailbox tray ##	The mailbox tray is full. When removing the paper, printing will be resumed.
paper full	## indicates the tray number.
;

OPERATION GUIDE 4-9