Installation Precautions
Environment
CAUTION:
Avoid placing the machine on or in locations which are unstable or not level. Such locations may cause the machine to fall down or fall over. This type of situation presents a danger of personal injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the vents, to allow air to be properly ventilated out of the printer.
Left: 300 mm | Right: 300 mm | Rear: 100 mm | Front: 1,000 mm |
(12 inches) | (12 inches) | (4 inches) | (40 inches) |
Always use the caster stoppers to stabilize the printer once it is in place to keep it from moving and/or falling over and causing injury.
Other Precautions
Adverse environmental conditions may affect the safe operation and performance of the machine. Install in an
•Avoid locations near a window or with exposure to direct sunlight.
OPERATION GUIDE | xix |
