9 Camera

Camera Tips

Your phone has a camera. Before using your phone’s camera, here are some tips:

You cannot activate the camera while on an active call or while browsing the Internet.

Once the camera is active, the home screen acts as the viewfinder.

If you get a “Low memory” error, check your resolution and quality compression settings.

If there is no activity within 30 seconds after you turn your camera on, the camera times out and returns to the previous launch point.

Menu settings and options can only be accessed when the camera is active.

Numbers in the top right corner indicate the number of snapshots remaining before the phone runs out of memory.

Take a Picture

1.To activate the camera, press and hold the Camera key. You can also select Camera from the main menu.

2.Focus on the image using the phone’s display as a viewfinder.

3.To take a picture, press the OK key. The picture is saved to Camera Pictures.

4.Select Send > Via MMS (to attach to a multimedia message), Via Bluetooth (to send to a Bluetooth-enabled device), or To Printer (to print on a Bluetooth-enabled device).

Select Erase to delete the picture from your phone.

5.Press the End key to exit camera mode.

Note: If your phone has no Bluetooth feature, you may send the file with a message only.

Camera Options

Camera Settings

Adjust the Resolution

From camera mode, select Options > Settings

>Resolution and a size for your pictures.

Numbers in the bottom left corner indicate the current resolution setting.

Set Self Timer

From camera mode, select Options > Settings > Self Timer and a time.

The icon indicates the timer is activated. When you take a picture, a beep plays three seconds from the time the shutter snaps the picture.

64

Camera Tips

Page 64
Image 64
Kyocera S2100 manual Camera Tips, Take a Picture, Camera Options, Camera Settings