Kyocera S2100 manual Get Started, Phone Battery, Install the Battery, Charge the Battery

1 Get Started

Phone Battery

Install the Battery

1. Hold the phone face

down.

2. Find notch directly below the back cover. It is square. Using your

thumbnail, lift the cover to remove.

3. Place the battery in the battery casing with the

metal contacts facing toward the bottom of the phone. The metal

contacts of the battery must make contact

with the metal contacts of the battery casing.

4. Replace the battery door by lining up the notches with the openings at the top and on each side of the battery casing.

5.Snap the cover into place.

Charge the Battery

1.Connect the AC adapter to the

Micro-USB jack on the

side of the phone.

2. Plug the adapter into a wall outlet.

The battery icon in the

upper-right corner of the screen tells you whether the phone is:

–Charging (the icon is animated)

–Partially charged

–Fully charged

You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.

Note: Before removing the battery, make sure the phone is powered off.

User Guide 9