Kyocera S2100 manual Set Ringer Mode, Set Ringers, Enable Roam Ringer, Ringer Shuffle

Sounds

Your phone has several settings that control the sound. You can select from a variety of ringers and adjust the volume.

Ringers

From Ringers, you can modify the following settings.

Set Ringers

From Ringer Type, select a ringer. (Scroll down the list to play the ringers.)

Enable Roam Ringer

From Roam Ringer, select Enabled to activate a specific ringer for roaming calls.

Ringer Shuffle

– Enable Ringer Shuffle

From Ringer Shuffle, select Enable to turn on the ringer shuffle.

– Edit Ringer Shuffle

1.From Ringer Shuffle, select Edit.

2.Select Add (to include the file in the shuffle) or Remove (to remove the file from the shuffle).

3.When finished, select Options > Done.

– View Ringer Shuffle

1.From Ringer Shuffle, select View. Only the files used in your shuffle appear.

2.Select Edit to modify the shuffle list or press the Back key to exit.

Set Ringer Mode

Your phone is set to make sounds when you receive calls, press keys, navigate through menus, and receive alerts (such as new messages). You can silence all sounds and set the phone to vibrate or light up when you receive calls and alerts.

From Ringer Mode, select one of the following:

•Normal Sounds rings for the incoming call or alert (in effect, returning the phone to a non-silent mode).

•Vibrate Only vibrates for the duration of the incoming call or other alerts.

•Vibe Then Ring vibrates for the first ten seconds and then rings for the remainder of the incoming call alert.

•Lights Only lights up for the duration of the incoming call or other alerts.

You can also press and hold the # Space key to toggle between Vibrate Only mode and Normal Sounds mode.

Note: The phone rings when attached to an external power source (such as a charger), even if all sounds have been silenced.

44 Sounds