Kyocera SL300RT manual Removing the Memory Card, Load the memory card

1

Camera Preparations

2 Load the memory card.

Make sure the side with the label attached is facing the LCD monitor.

To load the card, push it into the slot until it makes a clicking sound and stops.

•If the card does not slide in smoothly, you may be loading the card upside down. Check that the card is the right way up and do not try to force it into the slot.

•Do not attach stickers of any sort to the memory card as this may jam the card in the slot so that you cannot remove it.

3 Close the card/battery cover.

Close the cover and slide it in the opposite direction to the arrow (U) to lock it.

■Write protect switch (SD Memory Cards only)

SD Memory Cards are provided with a write protect switch.

Sliding this switch downward prevents any more data from being recorded onto the card and protects the images and data already stored on the card.

When you load a write-protected card into the camera in “C”, “M” or “N” mode, the “WRITE PROTECT” message appears the LCD monitor. You cannot use a write-protected card to take pictures. You cannot erase images on a write- protected card either.

Write-protect switch
Slide this switch down to
write-protect the￿￿￿￿￿card￿￿￿￿￿￿￿.	￿	￿

	Removing the Memory Card		￿
1	Check that the camera is switched	￿
	off and then open the card/battery
	cover.
	Slide the card/battery cover in the direction of the
	arrow (U) to open it.

1-4