Kyocera SL300RT manual Digital Zoom Switching the Digital Zoom on and OFF

Press the MENU button K to clear the menu.

4

Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode

4 Press U or D on the 4-way button to select		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
[METERING] and then press R.			￿	￿￿￿
5 Press U or D on the 4-way button to select		￿￿		￿￿￿￿￿￿
the desired metering mode and then press
the OK button E.		￿￿￿￿￿￿￿￿
[No icon] EVALUATION:The entire screen is partitioned into
			￿￿￿￿		￿￿￿￿
	64 zones and the light in each zone is			￿	￿￿￿￿￿￿￿￿
	measured to determine the optimum
CENTER:	exposure for the subject. (default)
	Light is measured with greater weight
	given to the central part of the screen
	(an area larger than that used for
	spot metering).

SPOT AREA: Light is measured at the center of the screen.

6

7 The icon for the selected exposure mode appears on the LCD monitor.

•Because this setting is retained even when the camera is switched off, you need to restore the original setting or otherwise modify the setting to suit the scene or subject being shot.

[DIGITAL ZOOM] Switching the Digital Zoom ON and OFF

Applicable mode: C/N/M

When you are composing a shot, if you press the T side of the zoom button until the maximum zoom is reached and then press the T side of the zoom button again, digital zooming begins ( p.3-3). To disable digital zooming, use the procedure below to set digital zooming to OFF.

1 Switch the camera on and press O or Q on the mode button until the “C”, “N” or “M” icon lights on the mode select LED.

4-24