Kyocera SL300RT manual When initialization is completed, the screen in reappears

3 Press U on the 4-way button to select [EXECUTE] and then press the OK button E.

Card initialization begins.

￿￿￿￿￿￿￿

4 When initialization is completed, the screen in step 2 reappears.

6

GUsing the SET UP Mode Functions

[POWER SAVE] Switching the Camera Off

Automatically to Save Power

Forgetting to switch the camera off can cause the camera’s battery charge to fall to a low level. For this reason, the camera features a Power Save function that automatically switches the camera off after several minutes if it is left switched on.

You can specify the delay until the camera is switched off.

		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
1 Switch the camera on and press O or Q on the mode
			￿￿
button until the “G” icon lights on the mode select LED.
2 Press U or D on the 4-way button to select		￿￿￿￿					￿￿
[POWER SAVE] and then press R.
			￿￿￿	￿￿
						￿￿￿￿￿
3 Press U or D on the 4-way button to select
		￿					￿￿￿￿
the delay until the camera switches off and
then press the OK button E.
			￿￿
NO PWR OFF:	The camera is not automatically switched	￿￿￿￿￿￿￿￿￿￿￿￿			￿￿￿￿￿￿
	off. Take care to remember to switch the
	camera off yourself.
1MIN.:	The camera switches to sleep mode after 1
3MIN.:	minute and switches off 2 minutes later.
	The camera switches to sleep mode after 3
	minutes and switches off 2 minutes later.
6MIN.:	(default)
	The camera switches to sleep mode after 6
	minutes and switches off 2 minutes later.

4 The delay time is set and the screen in step 2 reappears.

6-6