Kyocera SL300RT manual Switching the Camera On, Push the memory card in gently with your fingertip

•When the card access LED is flashing, images are being recorded onto the memory card. Do not open the card/battery cover or remove the memory card while the LED is flashing as this could cause data corruption or, in some cases, camera damage.

2 Push the memory card in gently with your fingertip.

If you push the memory card in slightly, it pops back out and you can then pull it out completely.

3 Close the card/battery cover.	￿￿
Close the cover and slide it in the opposite
direction to the arrow (U) to lock it.

Switching the Camera On

1

Camera Preparations

• Check that a memory card is loaded in the camera before switching the camera on.

Press the POWER button H.

The startup screen is displayed for a few seconds and then the normal shooting mode screen appears.

• While the camera is switched on, pressing the POWER button H switches the camera off.

1-5