Kyocera SL300RT manual Selected setting LT4S, etc. appears on the LCD monitor

Switch the camera on and press O or Q on the mode button until the “C” or “N” icon lights on the mode select LED.

7 The selected setting ([LT4S], etc.) appears on the LCD monitor.

•Setting a slow shutter speed may result in ‘noise’ in the image.

•When you switch the camera off, the long exposure setting is cancelled and the camera reverts to normal shooting (default).

•Take care to avoid camera shake. ( p.4-4)

4

Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode

[ISO] Changing the ISO Sensitivity to Photograph Fast Moving Subjects

Applicable mode: C/N

The ISO setting corresponds to the ISO value of conventional film and indicates sensitivity to light.

The ISO can be set to AUTO, 100, 200, 400 or 800, with the image quality deteriorating as the number increases. Increasing the camera’s sensitivity to light allows you to take pictures in dark locations or use fast shutter speeds. It also slightly increases the effective range of the flash. The default ISO setting is AUTO, in which case the camera sets the ISO sensitivity to suit the ambient conditions.

1

2 Press the MENU button K to display the menu icons.

3	Use L or R on the 4-way button to select		￿￿￿￿￿￿￿￿￿￿
	SET DETAILS [ ] and then press the OK
	button E.
4	Press U or D on the 4-way button to select
			￿￿￿
	[ISO] and then press R.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4-22