Kyocera SL300RT manual Beep Adjusting the Volume of the Camera Button Beep

3 Press U or D on the 4-way button to select [OFF] or [ON] and then press the OK button

E.

OFF:	Settings revert to their default values when the
ON:	camera is switched off.
	Settings remain valid when the camera is switched
	off.

￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4 The selected settings are applied and the screen in step 2 reappears.

6

GUsing the SET UP Mode Functions

[BEEP] Adjusting the Volume of the Camera Button Beep

Use this procedure to adjust the volume of the operation beep emitted when a camera button is pressed or activation beep emitted when the camera is switched on.

1	Switch the camera on and press O or Q on the mode
3	button until the “G” icon lights on the mode select LED.
	Press U or D on the 4-way button to select		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2	Press U or D on the 4-way button to select			￿	￿￿￿￿￿￿￿￿￿￿￿￿
	[BEEP] and then press R.
							￿￿
	the desired button beep volume and then
				￿	￿￿￿
	press the OK button E.
	+3:	Maximum volume
				￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿
	+2:	Medium volume (default)
	+1:	Low volume
	OFF:	No button beep

4 The selected settings are applied and the screen in step 2 reappears.

6-8