Kyocera SL300RT manual Charging the Battery, Loading the Memory Card

3 Grip the battery pack and pull it out
of the camera.
• Take care not to drop the battery pack. Strong
impacts caused by being dropped can cause the
battery pack to leak fluid.
• If you do not intend to use the battery pack for a long	1
period, store it in a cool, dark place.	Camera
Charging the Battery
	Preparations
• Before charging, check that the battery pack is in the camera.

Connect the AC adapter to the camera to charge the battery pack.

Full charging takes around 3 hours. Turn the camera off during charging.

The caution LED (red) lights during charging and goes off after roughly 2 hours, at which point the battery pack is 90% charged. Leaving the AC adapter connected for another hour charges the battery pack fully.

Caution LED

• When you first purchase the camera, you need to charge the battery fully.

• Leaving or repeatedly charging the battery pack or the camera with the battery pack installed in a hot location may impair battery pack performance and reduce the number of shots that can be taken. When this occurs, purchase a new battery pack.

• You can check the battery level by switching the camera on. ( p.1-6)

	Loading the Memory Card		￿
1	Check that the camera is switched	￿
	off and then open the card/battery
	cover.
	Slide the card/battery cover in the direction of the
	arrow (U) to open it.

1-3