Kyocera SL300RT manual Date Setting the Camera’s Date and Time

6

GUsing the SET UP Mode Functions

[BACKLIGHT] Changing the Monitor Backlighting Brightness

Use this procedure to adjust the brightness of the LCD monitor backlighting.

1	Switch the camera on and press O or Q on the mode
	button until the “G” icon lights on the mode select LED.
2	Press U or D on the 4-way button to select		￿￿￿￿	￿		￿￿￿
				￿￿￿￿￿￿
			￿￿￿￿￿￿￿￿￿￿
			￿￿￿￿￿￿￿￿￿￿
	[BACKLIGHT] and then press R.
3	Press U or D on the 4-way button to select		￿￿￿￿￿	￿￿￿￿￿
	the [BRIGHT] or [LOW POWER] and then
			￿￿￿￿	￿		￿￿
	press the OK button E.
	BRIGHT:	Gives brighter backlighting
			￿￿￿￿￿￿￿￿￿￿	￿￿	￿￿￿￿
	LOW POWER:	Restricts the backlight brightness to save
		power.

4 The selected brightness setting is applied and the screen in step 2 reappears.

[DATE] Setting the Camera’s Date and Time
See “Setting the Date and Time” ( p.1-6) in Chapter 1.			￿	￿￿￿
			￿￿￿￿￿￿
	￿￿￿￿￿￿￿￿￿￿
	￿￿￿￿￿￿￿	￿￿￿￿￿￿￿

[INSERT DATE] Writing the Date onto Image Files

Use this procedure to specify whether the date is inserted on your images.

• If images that were shot with [INSERT DATE] set to [WITH DATE]	￿￿￿	￿￿￿￿￿￿￿
are then printed with [PRINT] selected for [DATE] in [PRINT
SETTINGS] ( p.5-19), the dates will be printed on top of each
other.

•The date is inserted in the lower-right corner of the image. You cannot erase an inserted date only.

6-4