Kyocera VMS130 manual Call options, Use 1-Touch Dialing, Voice dialing

Place a Call on Hold

You can place a call on hold with Answer Hold enabled.

Note: If you are already on a call and you receive another call, you cannot place the incoming call on hold. With no call waiting enabled, the call goes to Voicemail.

When a call comes in, do the following:

1.Select Options > Answer Hold to place the caller on hold with your recorded hold message.

2.Select Answer to speak to the caller on hold or End Call to hang up without speaking.

Change Hold Call Message

1.From Answer Hold, select Re-record msg.

2.Record the message twice, as prompted.

3.Select Save to save the message or Options and one of the following:

–Play to replay your message.

–Re-record to record your message again.

–Exit to exit.

Use 1-Touch Dialing

The 1-Touch Dialing feature is the fastest way to call a speed dial location. To call a contact with speed dial, press and hold the speed dialing location. If it is a two-digit location, press the first digit briefly, then press and hold the second digit.

Note: To use 1-Touch dialing, you must enable

1-Touch dialing on your phone and have a speed dial location assigned to a contact.

From 1-Touch dialing, select Enabled to turn on 1-touch dialing.

Call options

Voice dialing

Use the following features to customize the voice commands.

Enable Automatic Add

From Automatic add, select Enabled to automatically add a contact to your voice dial list when you create a new contact.

Set Expert Mode

Use Expert mode to speak a command after you hear a tone instead of following the initial voice prompts.

From Expert mode, select one of the following:

•Normal sets the phone to default voice prompts.

•Expert sets the phone to sound tones instead of voice prompts.

Set Display Results

You can set the phone to display up to three voice recognition contacts when calling or searching for a contact with voice commands. From Display results, select Single best or Three best.

22 Call options