Kyocera VMS130 manual Security, Enable Auto-Answer, Enable Any Key

Set Digit Lengths

You can set the number of digits used for a phone number in your voice dial list.

From Digit lengths, select one of the following options:

•North american recognizes only 7, 10, and 1 + 10 digits in a phone number.

•Permit all allows 4-14 digits in a phone number.

Enable Voice Answer

You can set your phone to answer a call with your voice when using a hands-free accessory.

1.From Auto answer, select Disabled.

2.From Ringer mode, select Normal sounds.

3.From Headset sound, select Out of headset.

4.From Voice answer, select With accessory.

Enable Voice Wake-up

•From Headset sound, select Out of headset.

•From Voice wake-up, select With accessory to activate voice dialling.

Note: You must use a headset or hands-free kit and connect the AC adapter to the phone and the wall outlet for voice wake-up to work.

Use Voice Training

If your phone has trouble recognizing your voice, you can train your phone to recognize specifically your voice for numbers.

1.From Voice training, read the message and select OK > Train numbers > OK.

2.Follow the prompts for each number until training is complete.

Note: You must read the numbers digit by digit for voice training to work.

Enable Auto-Answer

From Auto answer, select After 5 seconds. The phone automatically answers after five seconds with a headset attached.

Enable Any Key

From Any key, select one of the following:

•Any key mute to silence calls when you press any key except for the Send or Speakerphone key.

•Any key answer to answer calls when you press any key except for the End, Back, or Navigation key.

Security

This section describes the security features on your phone. You can adjust these features to prevent access to your personal information. All security features are shielded by a four-digit lock code (typically 0000 or the last 4 digits of your phone number).

User Guide 23