Kyocera VMS130 manual Use Speed Dialing, Emergency Services

Use the Speakerphone

Your phone has a built-in speakerphone.

•To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on.

•To turn off the speakerphone, press the Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an Incoming Call

•To silence the phone without answering the call, press the Back key or press the Volume key up or down.

•To silence the phone and answer the call, press the Back key or press the Volume key up or down and then press the Send key.

Use Speed Dialing

Speed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Assign Speed Dials to Contacts” on page 29.

To call a contact that has a speed dial location:

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

Emergency Services

Call Emergency Service

You can call an emergency code even if your phone is locked or your account is restricted. When you call, your phone enters emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.

To dial an emergency code:

1.Enter your 3-digit emergency code.

2.Press the Send key.

Note: Regardless of your 3-digit emergency code (911, 111, 999, 000, etc.), your phone operates as described above.

Exit Emergency Services

When you have completed the emergency call:

1.Select Exit.

2.Select Exit again to confirm your choice.

Note: To determine who has access to

your location, see “Set Location Information” on page 25.

User Guide 9