Timer Setting
Timer Setting
When entering Set Time mode, if a key operator code has already been set, you must enter the code (up to 8 digits).Þ P.50 “User Code”.
Auto Off Timer
The machine turns off automatically to conserve energy after a specified amount of time has past after a job. This function is called “Auto Off”. The Time can be set from 10 seconds to 240 minutes.
Default: 1 minute
•Enter numbers with number keys
•Use arrow keys to switch between minutes and seconds.
•Auto off may not work while an error is displayed.
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after copying has finished or no operations are performed with the machine.
•The default setting is the same time interval as Auto Off Timer, so the Panel Off Timer is not used. This setting is only used if the Auto Off Timer setting is set to a longer interval than the Panel Off Timer setting.
•The warm up time for making a copy from standby mode is three seconds. The default setting is 1 minute.
•Enter a time interval between 10 seconds and 240 minutes with the number keys.
•Press the arrow keys to move the cursor between minutes and seconds.
System Reset Timer
The System Reset setting is a setting that automatically switches to the screen for the function set in Function Priority. This happens if no operations are performed or to when clearing an interrupted job. This setting sets the system reset interval.
The time can be set from 10 to 999 seconds.
Default: Yes, 60 seconds
Copier/Document Server Auto Reset Timer
Set the time interval after which the copy function and document server function are reset.
•
•
If No is selected, the machine will not automatically switch the user code entry screen and you will not be able to limit who uses the machine.
The time can be set from 10 to 999 seconds.
Default: Yes, 60 seconds
User Tools Settings | 5 - 9 |