Using the Finisher Option

Selecting Punch Mode

With the optional punch installed, you can have three holes punched into your copy sets.

Note: The optional finisher and bridge unit must be installed to use this function.

1 Touch the Punch key.

2 Enter the number of copy sets.

3 Set the originals in place, then press the Start key. Your copies will exit on the Finishers Shift Tray with holes punched in them.

4 Press the Start key.

5 To remove the paper punch outs from the finisher, refer to “Removing Chad” on page 9-20

7 - 6

Using Finisher/Sorters