Using the Finisher Option
Selecting Staple Mode
Depending on the finisher that you have, the following staple positions are available: Top: Staples on the upper left corner, left margin.
Top: Staples on the upper left corner, diagonal.
Top: Staples on the lower left corner, left margin.
Double: Staples on the left margin in two places.
Note: The optional finisher and bridge unit must be installed to use this function.
1 Touch the desired Staple Position key.
2 Using the keypad, enter the number of copy sets you require.
3 Set the originals in place, then press the Start key. Your copy sets are stapled and exit to the Finisher Shift Tray.
Using Finisher/Sorters | 7 - 5 |