Interface Settings/Parallel Interface
Interface Settings/Parallel Interface
Parallel Timing
Specifies the timing setting for the parallel interface. Under normal circumstances, you will not need to change this setting.
Default: ACK outside
Parallel Communication Speed
Specifies the communication speed for the parallel interface. If the communication speed is set too fast, data transfers may not flow smoothly. If this occurs, change the setting to “Standard”.
Default: High speed
Selection Signal Status
Specifies the level for the select signal setting of the parallel interface.
Default: High
Input Prime
Specifies whether the prime signal is active or inactive when an input prime signal is sent. Under normal circumstances, you will not need to change this setting.
Default: Invalid
Bidirectional Communication
Specifies the printer's response mode etc., for status request when using the parallel interface. If you experience problems when using other manufacturers printers, set this to “Off”. However, if this is set to “Off”, asynchronous functions will not work.
Default: Yes
Signal Control
Specifies the error processing settings for when an error occurs when printing from a computer or sending faxes. Under normal circumstances, you will not need to change this setting.
Default: Job acceptance priority
User Tools Settings | 5 - 13 |