File Transfer
File Transfer
Be sure to make these settings if you are using ScanRouter V2 Lite/Professional. Note r The optional ScanRouter V2 Professional is required for distributing received fax documents.
Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distributing documents or data from the machine.
Default: 000.000.000.000
•Press arrow keys to move between each group of three numbers.
•If you make a mistake, press the “Clear” key and enter the correct number.
Fax RX File Transmission
•Setting per Line
Specifies whether or not received fax documents should be sent to the ScanRouter V2 Professional for each of the fax lines.
Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do not Deliver
•Print at Delivery
Specifies whether or not received fax documents that are sent to the
Default: No
•File to Deliver
Specifies whether all received fax documents or only received fax documents that include delivery codes (documents with an ID and F code) should sent to the ScanRouter V2 Professional.
Default: File with Dlvry Code
•Delivery Failure File (Dlvry Failure File) If a received fax document cannot be sent to the ScanRouter V2 Professional, the documents is stored in the machine's memory.To print this stored data select “Print File”, to delete the data select “Delete File”.
If the machine can send data to the ScanRouter V2 Professional, data is sent automatically.
If you delete the data, you will not be able to distribute or print the data.
Recall Interval Time
Specifies the interval the machine waits before sending data or a document, if a data could not be sent to the ScanRouter V2 Professional.
Default: 300 Seconds
•
•
Enter an interval within the range of “60
This setting is for the Scanner function. The distribution of received fax documents will
5 - 14 | User Tools Settings |