Screen Contrast
Screen Contrast
The copy control panel uses a LCD to display the functions and operations or the copier. Condition under which the copier is placed, may make it necessary for you to adjust the contrast of the LCD panel.
1
2
Adjust the brightness of the LCD panel using the Display Adjust Knob.
Rotate the knob clockwise to lighten the display. Rotate the knob counter clockwise to darken the display.
Original Beeper
About two seconds after the copy job is done, a beeper beeps twice and an error message is displayed when you leave your originals on the Exposure Glass.
You can adjust when the beeper sounds using the Auto Response Sensor setting.
•If set to YES the beeper sounds as soon as you leave the copier after copying.
•If set to NO, the beeper sounds two seconds after copying.
You can also cancel this feature. See “General Features 1 of 2” on page
•The Display Panel shows: Connect Copying.
•After all originals are scanned, copying begins.
•If the copy quantity is an odd number, the extra copy is copies on the master copier. For example: Copy quantity of 5 is selected. Three copies are printed on the master copier and two copies are printed on the secondary copier.
Special Copier Functions | 6 9 |