Using the Finisher Option
Selecting Sort Mode
Sorting mode can save you a lot of time. You can have your copies automatically sorted in two ways:
Rotate Sort: Every other copy set is rotated by 90 degrees and
delivered to the exit tray. Note: the same size paper must be in two different paper trays and one must e landscape and the other portrait.
Shift Sort: Every other copy set is shifted for ease of separation. The saddle stitch finisher shifts only the top sheet of each set.
Note: The optional finisher and bridge unit must be installed to use this function.
1 Touch the Sort or Rotate Sort key.
Note: If Rotate Sort is not shown, it may be selected with User Tools.
2 Using the keypad, enter the number of copy sets you desire.
3 Set the originals in place, then press the Start key.
Note: If an original is misfed during sort copying, reset your originals in the Document Feeder, according to the instructions on the display. The display will indicate the number of scanned originals.
Using Finisher/Sorters | 7 - 3 |