Stamp
6 Touch the Program/Delete Stamp key.
Programming the User Stamp
1 Press the Program key.
2 Touch the stamp number from 1-
4 that you want to program.
•Stamp numbers with the data in symbol in front of it are already in use.
•If the stamp number is being used, the message on the
display asks if you want to overwrite it. Select either Yes of No.
3 Enter the stamp name using the letter keys in the message display.
•Up to 10 character can be entered.
4 Touch the OK key.
5 Enter the horizontal size of the stamp using the keypad. Then touch the # key.
6 Touch the Veritcal key, and enter the vertical size of the stamp using the keypad. Then, touch the # key.
7 Set the User Stamp on the exposure glass and then touch the Start Scanning key.
•The machine scans the original three times. Do not lift the document feeder until the
Special Copier Functions | 6 17 |