Bypass Copying
Thick Paper, Thin Paper, Transparencies
To make copies onto OHP
1 Open the bypass tray, and adjust the guides to the paper size.
Note: If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.
2 Lightly insert the OHP transparencies or thick paper face down until the beeper sounds. The indicator on the display automatically goes on.
•When you set an OHP transparency, make sure that its front and back faces are properly positioned.
•To avoid paper misfeeds, fan the paper before setting it in the tray.
3 Press the # key.
4 Select [OHP Sheet]or [Thick
Paper].
5 Press the [OK]key.
6 Set your originals and press the Start key.
Note: When copying onto OHP transparencies, remove copied sheets one by one.
7 When your copy job is finished, press the Clear Modes key to clear the settings.
4 - 14 | Copying Methods |