Leica 18115, 18461 manual 214, Edges of pictures are cut off when printing

Miscellaneous

Q&A Troubleshooting

TV, computer, printer (continued)

The camera does not communicate with the computer. ●●The connection is incorrect (→190).

●●Check whether computer has recognized the camera.

→Set [USB Mode] to [PC] (→39).

→Turn the camera off and then on again.

The computer does not recognize the card (only reads the built-in memory). ●●Disconnect the USB cable and reconnect with a card inserted.

The computer does not recognize the card. (When using an SDXC memory card)

→Check whether your computer is compatible with SDXC memory cards.

→A message prompting you to format the card may appear when you connect it. Do not format the card.

→If the [Access] indicator on the monitor does not go off, turn off the camera’s power before disconnecting the USB cable.

Printing does not work in spite of the connection to a printer. ●●The printer is not compatible with PictBridge.

●●Set [USB Mode] to [PictBridge(PTP)] (→39).

The edges of pictures are cut off when printing.

●●Erase any trimming or edgeless printing settings on the printer before printing. (Consult the printer’s instructions.)

●●The aspect ratio of the pictures is different from that of the paper used for printing. → If printing in a shop, check if 16:9 sizes can be printed.

Panorama pictures are not printed properly.

●●The aspect ratio of panorama pictures is different from that of regular still pictures, and therefore some panorama pictures may not be printed correctly.

→ Use a printer with support for panorama pictures. (Refer to the printer’s instructions.)

- 214 -