Miscellaneous

Message displays

[Memory card parameter error]

●●The card is not of SD standard.

●●Use a card compatible with the camera.

••SD memory cards (8 MB to 2 GB)

••SDHC memory cards (4 GB to 32 GB)

••SDXC memory cards (48 GB, 64 GB)

[Read Error] / [Write Error] [Please check the card]

●●Data reading has failed.

Check whether the card has been inserted correctly (→18). ●●Data writing has failed.

Turn off the camera and remove the card. Reinsert the card and turn the camera on again. ●●The card may possibly be damaged.

●●Try with a different card.

[Cannot record due to incompatible format(NTSC/PAL) data on this card.]

●●Format the card after saving necessary data on a PC etc. (→42) ●●Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

●●If recording stops even when using a card of the recommended speed class (→20), the data writing speed drops. If this happens, we recommend backing up the data on the memory card and formatting it (→42).

●●Motion picture recording may be automatically terminated with certain cards.

[A folder cannot be created]

●●The folder numbers in use have reached 999.

Save the needed data on a computer or an other device, and then use [Format] on the camera (→42).

The folder number is reset to 100 when performing [No.Reset] (→38).

[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]

●●The supplied AV cable is connected to camera.

To remove the message immediately → Press [MENU/SET].

To change the aspect ratio → Change [TV Aspect] (→39). ●●The USB cable is only connected to camera.

A message disappears when cable is also connected to another device.

[This battery cannot be used]

●●Use a genuine Leica battery (→8).

●●The battery is not identifiable by the camera due to dirty terminals.

Wipe any dirt away from the terminals.

[Recording failed.]

●●Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the subject lacks contrast.

- 206 -

Page 206
Image 206
Leica 18115, 18461 manual 206, Memory card parameter error