Leica 18461, 18115 manual Expo.Meter, Lens Resume, MF Resume, MF Assist

Preparations

Using the [Setup] menu

••For the setting procedures of the menu. (→25)

[Expo.Meter]

For selecting whether or not to display the setting display when e.g. shutter speed and aperture value settings or Exposure Compensation are performed.

■■Settings: [ON] / [OFF]

●●If the setting display is not displayed, press the [DISP] button to switch the display of the monitor.

●●The setting display will turn off if no operation is performed for approximately 4 seconds.

[Lens Resume]

For saving the zoom position and the Manual Focus position in the memory when the camera is turned off.

■■Settings [Zoom Resume]

[ON]: Returns to the zoom position that was saved in the memory when the camera is turned on the next time.

[OFF]

[MF Resume]

[ON]: Saves the Manual Focus position in the memory when the camera is turned [OFF] or when the focus selector switch is set to modes other than [  ]. This setting will return to the focus position saved in the memory when the camera is turned on or the focus selector switch is set to [  ] next time.

[OFF]

●●The Manual Focus position saved in the memory and the position to which the camera returns when it is turned on may differ depending on the recording conditions.

[MF Assist]

This mode facilitates simple and precise manual focusing by enlarging a section of the monitor image.

••About MF assist (→105)

■■Settings: [ON] / [OFF]

- 35 -