Leica 18115, 18461 manual 140, Multi Expo

Taking pictures

Using the [Rec] menu

••For the setting procedures of the menu. (→25)

[Multi Expo.]

This mode allows you to combine two or three still pictures into a single one.

■■Settings

[Start] Start taking pictures.

Decide on your composition and take the first picture

Press to select [Next] and then [MENU/SET]

••[Retake]: Delete the result of the last shot and take another picture.

••[Exit]: Exit Multi Exposure and save the picture that was taken.

Take the second and third pictures

••When you press [MENU/SET] while taking pictures, the pictures that you took are saved and Multi Exposure is closed.

Use cursor buttons to select [Exit] and then press [MENU/SET]

[Auto Gain]	[ON]: Combines several pictures into one by automatically adjusting the
	brightness in accordance with the number of pictures taken.
	[OFF]: Combines several pictures into one by simply overlapping them
	without any brightness adjustments.
	Since this setting may create a combined picture that is too bright
	for some situations, it may be advisable to set an Exposure
	Compensation.

●●Still pictures are not saved in memory until Multi Exposure is ended.

●●Information for the picture taken last will be used as recording information of pictures taken using Multi Exposure.

●●The resolution setting will be fixed at the point at which you select [Start].

●●The zoom position and White Balance are fixed at the point at which you take the first picture.

●●There are some restrictions on the functions, for example, you will not be able to use the following functions.

••[Burst Shooting] ••[i.Dynamic] ••[Auto Bracket] ••[Aspect Bracket] ••[WB Bracket]

- 140 -