Leica M205 C, M205 A manual Bases, Cross-stage and base, Damaged Place the cross-stage on the base

IsoPro™ Motorized Cross-stage: Assembly (continued)

The bases

The TL BFDF, TL RC™ and RCI™ transmitted light bases can be equipped with three different stages: standard stage, manual and IsoPro™ automated cross-stage. The selected stage is mounted on the base before commissioning. You can switch between the stages at any time with just a few hand movements.

The following paragraph assumes use of the base without the stage mounted. Disassembly is performed in reverse order of the following steps.

Cross-stage and base

• Never move the sledge of the motorized cross-stage manually in the X direction, as otherwise the mechanical system will be

damaged!

1.Place the cross-stage on the base.

2.Pull the upper part of the cross-stage care- fully toward the user, fastening the lower part onto the transmitted-light base.

3.Screw the cross-stage evenly onto the three threaded holes.

4.Push the cross-stage all the way back towards the column.

5.Reinsert the glass plate back into the stan- dard stage.

Leica M series Manual 38