Leica M205 A IsoPro Manual Cross-stage Assembly, IsoPro Cross-stage, Left or right operation

IsoPro™ Manual Cross-stage: Assembly

IsoPro™ Cross-stage

Before the IsoPro™ cross-stage is mounted to the base, the axis containing the control buttons is attached either on the left or the right side of the cross-stage.

If the controls are to be mounted on the left- hand side, the gear rod on the bottom side of the cross-stage must be unscrewed and reat- tached in reverse.

1.Take the glass plate from the cross-stage.

2.Turn the cross-stage around and place it onto a non-slip surface.

3.Change the gear rod from the left to the right-hand side.

4.Skip the next two steps to mount the controls.

Before the IsoPro™ cross-stage is mounted to the base, the axis containing the control buttons is attached either on the left or the right side of the cross-stage.

Left or right operation

If the controls are to be mounted on the left- hand side, the gear rod on the bottom side of the cross-stage must be unscrewed and reat- tached in reverse.

Leica M series Manual 33