Leica M165 C, M205 A Control assembly, Cross-stage assembly, Place the cross-stage on the base

IsoPro™ Manual Cross-stage: Assembly (continued)

1.Take the glass plate from the cross-stage and turn it around.

2.Change the gear rod from the left to the right-hand side.

Control assembly

1.Take the glass plate from the cross-stage and turn it around.

2.Attach the axis with the control buttons to the desired side. The fastener snaps into the cross-stage magnetically.

4.Attach the axis with the two Allen screws provided.

5.Attach the cover rail to the cross-stage.

Cross-stage assembly

1.Place the cross-stage on the base.

2.Pull the upper part of the cross-stage care- fully toward the user, fastening the lower part onto the transmitted-light base.

Leica M series Manual 34