Leica M205 A, M165 C, M205 C manual AX Carrier Preparation, Tools, Hex socket screwdriver, 2.5 mm

AX Carrier – Preparation

Tools

★★ Hex socket screwdriver, 2.5 mm

Preparing the AX carrier

Before the AX carrier is installed, it may first have to be prepared for the optics carrier to be used (Leica M125, M205 C or M165 C).

1. Check the switch position.

★★ If the switch position corresponds to the optics carrier used, skip the following steps. Otherwise, proceed as follows:

2.Unscrew the two screws that hold the switch in position.

3.Pull out the switch, rotate it into the desired position and reinsert it.

4.Important: push the switch all the way into the mount while reinserting the screws. Only this ensures that the switch is posi- tioned correctly.

Leica M series Manual 27