Leica M205 C Graticules, Use with the AX carrier, Convergence angle in the stereoscopic image

Graticules

Use

Graticules make length measurements and counting easier, particularly for workstations that are not equipped with a digital camera and LAS software.

The graticules for length measurements and numbering are fitted in mounts and are inserted into the eyepieces.

1. Screw the insert off of the eyepiece.

2.Clamp the graticule on the insert, applying moderate pressure. Ensure that the grati- cule fits tightly.

3.Screw the insert and graticule firmly into place and replace the eyepiece in the tube.

4.You can now align the graticule by rotating the eyepiece in the tube and then tighten- ing it using the clamping screw.

Use with the AX carrier

If possible, measure with the micro- scope carrier AX in vertical position. The measurements are more accurate without the

convergence angle in the stereoscopic image.

Leica M series Manual 62