1
PRINTING FROM WINDOWS |
|
Basic printing | (part 2) |
5 | Click the "Print" button ("OK" button in |
Windows 95/98/Me/NT 4.0). |
Printing begins. The print job is delivered to one of the following trays (depending on which output devices are installed):
●Job separator tray kit is installed: Upper tray
●Finisher is installed: Center tray
● The output tray can be selected in the key operator
Note | programs (see "OUTPUT TRAYS" in the key |
| |
| operator's guide). |
● The output tray can also be selected in the print |
settings at the time of printing. To change the tray |
selection, select the desired tray in "Output" in the |
"Paper" tab of the printer driver setup screen. |
● Printing can be canceled in the job status screen. |
When "Paper Selection" is set to "Auto Select"
If "Paper Selection" is set to "Auto Select" in the "Paper" tab of the printer driver setup screen and the correct size of paper for a print job is not loaded in the machine, the printing procedure will vary depending on the "FORCED OUTPUT OF PRINT" setting in the key operator programs (see the key operator's guide).
When "FORCED OUTPUT OF PRINT" is disabled
If the bypass tray can be used, a message prompting you to print from the bypass tray will appear in the touch panel. Press the [PRINT] key on the operation panel, touch the [BYPASS TRAY] key, load paper in the bypass tray, and then touch the [BYPASS] key. Printing will begin automatically.
When "FORCED OUTPUT OF PRINT" is enabled
Printing will take place using a size of paper that is close to the size of the print image.
☞Canceling a print job |
● If the paper type setting in the printer driver is different |
from the bypass tray's paper type setting in the |
machine, printing may stop. To resume printing, press |
the [PRINT] key on the operation panel, touch the |
[BYPASS TRAY] key in the touch panel, and specify |
the same paper type as in the printer driver. |
Note
If the paper is loaded in a different orientation than the print image, the image is automatically rotated to match the paper. This setting can be changed in the key operator programs (see "ROTATED PRINT" in the key operator's guide).
CONTENTS | I N D E X | 7 |
|
|
|
