Sharp M270, AR-M230 manual How to print a print hold job

2

ADVANCED PRINTING (WINDOWS)

Printing using the print hold function (part 2)

How to print a print hold job

When you print a job using the Print Hold function, the job is stored in the print hold job list in the initial screen of printer mode. Follow the steps below to print the print hold job.

1	Press the [PRINT] key to switch to the initial
	screen of printer mode.
	COPY
	PRINT	ON LINE
		DATA
	SCAN	DATA

2	Select the job that you wish to print.
	PRINT HOLD JOB LIST		You can touch the	or
	SHARP001	Microsoft Word -	key to change screens.
	SHARP002	Microsoft PowerP
	SHARP003	product_infomati
	SHARP004	cost.xls

3	If you set a PIN number in the printer driver,
	press the numeric keys to enter the 5-digit
	number.			The PIN number must be
				entered to print the job. (If you
	LIST
				did not set a PIN number, this
	ENTER PIN VIA THE 10-KEY.
				step is not necessary.)
			CANCEL
				As you enter each digit, "-"
		cost.xls

changes to " ".

4 Makeset. sure that the desired number of copies is

	To change the number of
NUMBER OF PRINTS	copies, touch the	or	key.

CONTENTS I N D E X 22