Lenovo RD540 manual Hot-swap hard-disk-drive backplane

ThinkServer RAID 710 Adapter (also known as 9270CV-8i RAID adapter)

The following illustration shows the connectors on the ThinkServer RAID 710 Adapter.

Figure 20. ThinkServer RAID 710 Adapter

1Port 1

2Port 2

3

ThinkServer RAID Super Capacitor Module connector

1

Port 1

Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 37.

2

Port 2

Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 37.

3

ThinkServer RAID Super Capacitor Module connector

Used to connect the cable of a ThinkServer RAID Super Capacitor Module. See “Replacing the ThinkServer RAID Super Capacitor Module” on page 129.

Hot-swap hard-disk-drive backplane

Your server comes with one of the following hot-swap hard-disk-drive bay and backplane configurations:

•Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane

•Up to eight 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with one backplane

Chapter 3. Product overview 33