Notes:
•Enabled means that the function is configured.
•Disabled means that the function is not configured.
The Advanced menu contains the following submenus. For more information, enter the corresponding submenu and refer to the instructions on the screen.
•PCI/PCIE Configuration: View and set PCI configuration parameters.
•ACPI Configuration: View and set ACPI configuration parameters.
•Processor Configuration: View information about the installed microprocessors and set microprocessor configuration parameters.
•Memory Configuration: View information about the installed memory modules and set memory configuration parameters.
•Chipset Configuration: View and set chipset configuration parameters.
•SATA/SAS Configuration: View information about the installed SATA or SAS devices and set SATA or SAS configuration parameters.
•USB Configuration: View and set USB configuration parameters, such as enabling or disabling USB devices.
•Serial Configuration: View and set serial connector configuration parameters.
•UEFI Network Setup: View and set UEFI Ipv4 PXE and UEFI Ipv6 PXE configuration parameters.
•iSCSI Configuration: View and configure the iSCSI parameter.
Security menu
You can set passwords and configure the TPM function on the Security menu in the Setup Utility program. For each menu item, press Enter to show selectable options and select a desired option by using the up and down arrow keys or type desired values from the keyboard. Some items are displayed on the menu only if the server supports the corresponding features.
Notes:
•Enabled means that the function is configured.
•Disabled means that the function is not configured.
The Security menu contains the following items:
•Administrator Password: Set an administrator password to protect against unauthorized access to your server. See “Using passwords” on page 55.
•User Password: Set a user password to protect against unauthorized access to your server. See “Using passwords” on page 55.
•TPM/TCM: Configure the TPM function if your server has a TPM installed in the TPM connector on the system board. See “Configuring the TPM function” on page 56.
Server Management menu
You can view system information and view or change event log and BMC settings on the Server Management menu in the Setup Utility program. On each submenu, press Enter to view the information or show selectable options and select a desired option by using the up and down arrow keys. Some items are displayed on the menu only if the server supports the corresponding features.
The Server Management menu contains the following submenus. For more information, enter the corresponding submenu and refer to the instructions on the screen.
Chapter 5. Configuring the server 53
