Lenovo RD540 manual Installing the bracket with the solid-state drive

8.Align the screw holes in the drive adapter and the solid-state drive with the corresponding holes in the drive bracket. Then, install the five screws to secure the drive adapter and the solid-state drive to the bracket.

Figure 88. Installing the screws to secure the drive adapter and the solid-state drive to the bracket

9.Slide the bracket with the solid-state drive into the drive bay from the front until it snaps into position and then completely close the handle.

PSU

Mem

CPU

Figure 89. Installing the bracket with the solid-state drive

10. Check the hard-disk-drive-status LEDs to ensure that the solid-state drive is operating correctly. You might have to restart the server for the newly installed solid-state drive to be recognized. See “Hot-swap

Chapter 6. Installing, removing, or replacing hardware 123