Lenovo RD540 manual Installing or replacing the optical drive

5. Remove the two screws that secure the solid-state drive.

Figure 93. Removing the screws that secure the solid-state drive

6. Lift the solid-state drive up to remove it from the drive adapter.

Figure 94. Removing the solid-state drive from the drive adapter

7.Install a new solid-state drive. See “Installing a 2.5-inchsolid-state drive into a 3.5-inchhard-disk-drive bay” on page 120.

8.If you are instructed to return the old solid-state drive, follow all packaging instructions and use any packaging materials that are supplied to you for shipping.

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To configure RAID, go to “Configuring RAID” on page 62.

•To complete the replacement, go to “Completing the parts replacement” on page 154.

Installing or replacing the optical drive

Attention: Do not open your server or attempt any repair before reading and understanding “Safety information” on page iii and “Guidelines” on page 67.

126ThinkServer RD540 User Guide and Hardware Maintenance Manual