Wireless Access Point User Guide
Data - Admin Login Screen
Login
| User Name | Enter the login name for the Administrator. | |
|
|
|
|
| Change Admin Password | If you wish to change the Admin password, check this field | |
|
| and enter the new login password in the fields below. | |
|
|
|
|
| New Password | Enter the desired login password. | |
|
|
|
|
| Repeat New Password | ||
|
|
|
|
| Admin Connections |
|
|
| Allow Admin connections | If checked, then Admin connections via the Wireless interface | |
| via wired Ethernet only | will not be accepted. | |
|
|
| |
| Enable HTTP | Enable this to allow admin connections via HTTP. If enabled, | |
|
| you must provide a port number in the field below. Either | |
|
| HTTP or HTTPS must be enabled. | |
|
|
| |
| HTTP Port Number | Enter the port number to be used for HTTP connections to this | |
|
| device. The default value is 80. | |
|
|
| |
| Enable HTTPS | Enable this to allow admin connections via HTTPS (secure | |
|
| HTTP). If enabled, you must provide a port number in the | |
|
| field below. Either HTTP or HTTPS must be enabled. | |
|
|
| |
| HTTPS Port Number | Enter the port number to be used for HTTPS connections to | |
|
| this device. The default value is 443. | |
|
|
| |
| Enable Telnet | If desired, you can enable this option. If enabled, you will able | |
|
| to connect to this AP using a Telnet client. You will have to | |
|
| provide the same login data (user name, password) as for a | |
|
| HTTP (Web) connection. | |
|
|
|
|
70
