Package Contents, Physical Details | LevelOne WAP-0005 specs

Wireless Access Point User Guide

Package Contents

The following items should be included:

•WAP-0005

•Power Adapter

•Quick Start Guide

•CD-ROM containing the on-line manual and setup utility.

If any of the above items are damaged or missing, please contact your dealer immediately.

Physical Details

Front Panel LEDs

Status

Power

LAN

Wireless

LAN

Figure 2: Front Panel

On - Error condition.

Off - Normal operation.

Blinking - During start up, and when the Firmware is being upgraded.

On - Normal operation.

Off - No power

On - The LAN (Ethernet) port is active.

Off - No active connection on the LAN (Ethernet) port.

Flashing - Data is being transmitted or received via the corresponding LAN (Ethernet) port.

On - Idle

Off - Error- Wireless connection is not available.

Flashing - Data is being transmitted or received via the Wireless access point. Data includes "network traffic" as well as user data.

4

Image 8

LevelOne WAP-0005, 11g PoE Wireless Access Point manual Package Contents, Physical Details

Contents

Users Guide Page Table of Contents Wireless Access Point Overview General ProblemsOverview Wireless LAN Terminology Overview Command Reference Features of your Wireless Access Point Introduction Security Features Advanced Features Introduction Package Contents Physical Details Rear Panel Installation ProcedureRequirements Requirements Using PoE Power over Ethernet Using PoE Power over EthernetPage Access Point Setup Setup using the Windows UtilityInstallation Overview Wireless Access Points Buttons Setup Procedure Pass-phrase just works for Hex and not for Setup using a Web Browser Password Dialog If you cant connect Buttons Access ControlData Access Control Screen Trusted Wireless Stations Data Trusted Wireless Stations Security Profiles Select NoneEdit Add Data Security Profiles Screen ProfilePrimary Profile Isolation Wireless Band Security Profile ScreenProfile Data Security System Setup Using MAC authentication Security Settings NoneRadius MAC Authentication Setup Radius-based MAC authentication Screen Data Radius-based MAC Authentication Screen UAM authentication Internal UAM authentication External UAM Screen Data UAM Screen Security Settings WEP Data WEP Screen Security Settings WPA-PSK Data WPA-PSK ScreenNetwork Key WPA Encryption Pairwise Key Update Group Key UpdateUpdate Group key When any membership Security Settings WPA-802.1x WPA-802.1x Wireless Security Data WPA-802.1x Screen WPA-802.1x Update Report Every Security Settings 802.1x Wireless Security Data 802.1x Screen 802.1x UAM System Screen Data System ScreenIdentification IP Address Wins Server Name/IP Address Wireless Screens Basic Settings ScreenData Basic Settings Screen Wireless Mode AP Mode Bridge ModeBroadcast Ssid MAC Address field Parameters Advanced Settings Data Advanced Settings ScreenBasic Rate Options 802.11b Security PC and Server ConfigurationUsing WEP Using WPA-PSK Using WPA-802.1x Wireless Station ConfigurationRadius Server Configuration 802.1x Services Installation 802.1x Server Setup Windows 2000 ServerWindows 2000 Domain Controller Setup Components Screen Dhcp server configuration CA Screen IP Address Screen Certificate Authority Setup Certificate Authority Screen Active Directory Screen Group Policy Screen Internet Authentication Service Radius Setup Service Screen Authentication Screen Remote Access Login for Users Dial-in Screen 802.1x Client Setup on Windows XP Client Certificate Setup Wireless CA Screen Identifying Information Screen 802.1x Authentication Setup Encryption Settings Wireless Networks Screen Enabling Encryption Properties Screen Using 802.1x Mode without WPA Status Screen Operation and StatusOperation Access Point WirelessData Status Screen Security Profiles 4GHz Wireless Statistics ScreenData Statistics Screen System Up Time Control Multicast PacketsManagement Clients Profile StatusBand Data Activity LogData Activity Log Station List Data Station List ScreenStation List Refresh Button Access Point Management Admin Login Screen Admin Connections Data Admin Login ScreenLogin Auto Config/Update Data Auto Config/Update ScreenConfiguration on this AP Perform Auto Auto Update Config File Data Config File ScreenBackup Restore Defaults Revert to factory Log Settings Syslog Data Log Settings Screen Data Rogue AP Screen Enable DetectionRogue APs Data Snmp Screen GeneralManagers Traps Upgrade Firmware To perform the Firmware Upgrade Specifications Wireless Access PointHardware Specifications Wireless Specifications Software Specifications Feature Details Message Log FCC Statement FCC Radiation Exposure Statement To Find the Access Points IP Address TroubleshootingGeneral Problems Wireless Access Point User Guide Normally, no changes need to be made Checking TCP/IP Settings Windows 9x/MEWindows TCP/IP Using Dhcp Using Specify an IP Address Checking TCP/IP Settings Windows NT4.0 Windows NT4.0 TCP/IP Obtain an IP address from a Dhcp Server Checking TCP/IP Settings Windows Network Configuration Win Using a fixed IP Address Use the following IP Address Checking TCP/IP Settings Windows XP Network Configuration Windows XP Using Dhcp About Wireless LANs Wireless LAN TerminologyAd-hoc Mode Infrastructure Mode Channels WPA-802.1x 802.1x Using the CLI Serial Port Command Line InterfaceUsing the CLI Telnet Command Reference CLI Port Settings Wireless Access Point User Guide Display 11g Beacon Rate Wireless Access Point User Guide Mem -- system memory statistics Set 11g Beacon Rate Appendix C Windows TCP/IP Wireless Access Point User Guide